S&W J frame round butt Model 640
Posted by HANDICRAFTGRIPS Co., Ltd. on
Smith & Wesson Model 640
Handmade Grips by Handicraftgrips fit for model 640 J frame round butt
https://www.handicraftgrips.com/collections/j-frame-round-butt-1
S&W 640 | |
---|---|
Type | Service Revolver |
Place of origin | United States |
Service history | |
In service | 1990–present |
Production history | |
Manufacturer | Smith & Wesson |
Unit cost | $729.00[1] |
Specifications | |
Mass | 22.58 oz. ; 15.8 oz for alloy version |
Length | 6.56"[1] |
Barrel length | 2.125"[1] |
Caliber |
.357 Magnum .38 Special .38 Special +P |
Action | DAO |
Effective firing range | 22.86 meters |
Maximum firing range | 45.72 meters |
Feed system | 5-round cylinder |
Sights | Fixed |
The Smith & Wesson Model 640 revolver is a 5-shot snubnosed revolver that is chambered in either .38 Special or .357 Magnum caliber introduced in 1990. Like other "J-frame" Smith & Wesson revolvers, it has a swing-out cylinder, but this model features a concealed hammer, and is part of the Centennial line.[2]
Handmade Grips by Handicraftgrips fit for model 640 J frame round butt
https://www.handicraftgrips.com/collections/j-frame-round-butt-1
History[edit]
Handmade Grips by Handicraftgrips fit for model 640 J frame round butt
https://www.handicraftgrips.com/collections/j-frame-round-butt-1
The first model was chambered in .38 Special and fitted with a standard barrel of 1-7/8 inch length. The second model had a slightly heavier and longer barrel of 2-1/8 inch length. The gun was constructed entirely of stainless steel. In 1995 the model 642 was introduced which was made in aluminium and designated "airweight".
A 3" barreled version was offered until 1993, when it was dropped from production. That same year S&W introduced the Model 940, similar in appearance, but chambered in 9mm Luger. In 1996 the 940 was dropped and S&W began chambering the 640 in .357 Magnum. Because of the power of the .357 magnum cartridge, the frame is strengthened just in front of the cylinder release on those models.[3]
Handmade Grips by Handicraftgrips fit for model 640 J frame round butt
https://www.handicraftgrips.com/collections/j-frame-round-butt-1
In 2001 a Scandium framed version was introduced in .357 Magnum designated as the Model 340. This revolver weighed 10.9 ounces.[4]
9/11 Revolver[edit]
A Model 640 was carried by New York City police officer Walter Weaver when he entered the World Trade Center North Tower during the September 11, 2001 attacks. Weaver was on the 6th floor attempting to free people trapped in an elevator when the tower collapsed. Officer Weaver's remains were never found but his revolver was recovered from the site, missing the grips but intact. His family donated it to the NRA National Firearms Museum in Fairfax, Virginia and displayed with a photo of Weaver.[5]
Handmade Grips by Handicraftgrips fit for model 640 J frame round butt
https://www.handicraftgrips.com/collections/j-frame-round-butt-1
Users[edit]
- United States -New York City Police Department (off-duty/backup)
References[edit]
- ^ Jump up to: a b c "Model 640". Smith & Wesson. Retrieved 4 May 2012.
- ^ Ayoob, Massad (2010). Massad Ayoob's Greatest Handguns of the World. Gun Digest Books. pp. 218–220. ISBN 978-1-4402-0825-6.
- ^ Hartink, A.E. (2003). The Complete Encyclopedia of Pistols and Revolvers. Edison, New Jersey: Chartwell Books, Inc. pp. 225. ISBN 978-0-7858-1871-7.
- ^ Supica, Jim; Richard Nahas (2007). Standard Catalog of Smith & Wesson. Iola WI: Krause Publications. p. 151.
- ^ "9/11 Revolver - Officer Walter Weaver". NRA Museum. Retrieved 20 June 2019.